Home Catalog DeterBio

DeterBio

Composition 
• 2-(2-Butoxyethoxy) ethanol  
• Alkyl polyglycoside  
• Lauramine oxide / Myristamine oxide  
• Sodium olefin sulfonate  

Hazard statements 
• May be corrosive to metals.  
• Causes severe skin burns and eye damage.  
• Corrosive to the respiratory tract.  

Safety and usage instructions  
• Keep only in the original container.  
• Do not inhale mist or vapors.  
• Wash thoroughly after use.  
• Wear protective gloves, protective clothing, eye protection, and face protection.  

First aid instructions  
• If swallowed: Rinse mouth. Do not induce vomiting.  
• If on skin or hair: Remove all contaminated clothing immediately. Rinse skin with water or shower.  
• If inhaled: Move the person to fresh air and keep them in a comfortable position for breathing.  
• If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.  
• Immediate action: Call a POISON CONTROL CENTER or doctor immediately.  

Additional measures  
• Wash contaminated clothing before reuse.  
• Absorb product spills to prevent damage to nearby materials.  

Storage conditions  
• Store under lock and key.  
• Store in a corrosion-resistant container with a corrosion-resistant inner lining.  

Disposal 
• Dispose of contents/container in accordance with local, regional, national, and international regulations.  

Hazard statements  
• Corrosive to the respiratory tract.  

Composition  
• Anionic surfactant  
• Nonionic surfactant  
• Sequestering agent  

Applications 
• Deterbio can be used for cleaning equipment and hard surfaces, including:  
• Metal  
• Wood  
• Plastic  
• Concrete  
• Feeders  
• Drinkers  
• Etc.  

Usage | Dose | Application  
Cleaning by spraying, foaming, or immersion | 2% (1:50) | Dry clean all surfaces and equipment and pre-soak all surfaces with clean water at low pressure, leaving for 2 hours. Using a foaming lance, apply DeterBio to all surfaces at an application rate of 300 ml/m². Allow a contact time of 20 minutes before thoroughly rinsing all surfaces with clean water at low to medium pressure.  
Dosage can be adjusted based on the level of dirt | 2% - 4% (1:50 to 1:25)  

Precautions  
• Store only in the original packaging.  
• Keep in a cool place, away from direct sunlight.  
• Do not allow to freeze.  
• Do not mix with other chemicals.  
• Do not dispose of the concentrate or its dilutions into or near watercourses.  
• Surfaces that come into contact with food must be thoroughly rinsed with potable water before use.  
• This application must only be used in accordance with local regulations.  
• Consult the safety data sheet for additional information.  
• Rinse aluminum surfaces with water after use.  
• Ensure adequate protection against spray mist and aerosols of the diluted product.